Motor stator and rotor stampings
Stator and rotor stampings on progressive tooling, with auto-stack and auto-skew where the part calls for it.
- Grades
- CRNO, CRCA
- Thicknesses
- 0.35 mm to 1.00 mm
Markets served
Motors, fans and appliances
Alpine Stampings makes stator and rotor stampings, segmental laminations and pump and fan laminations for motor, fan and appliance manufacturers, on progressive tooling with auto-stack and auto-skew at its works in Daman, India.
What we make for this market
Segmental laminations
Segmental laminations for large-diameter cores, where a full ring would waste material.
- Grades
- CRNO
- Thicknesses
- 0.35 mm to 0.65 mm
Pump and fan laminations
Stator and rotor sets for pump and fan motors, in volume.
- Grades
- CRNO
- Thicknesses
- 0.50 mm to 0.65 mm
Slit coils
Slit to the width you specify, from mother coil up to 1250 mm wide.
- Grades
- CRGO, CRNO, CRCA
Parts in this market usually run against a repeat schedule, with the same first-off, in-process and final inspection on every lot.
Grades and thicknesses
- Grades
- CRNO, CRCA, CRGO
- Thicknesses
- 0.35–1.00 mm
All markets served
Request a quotation
Send us the drawing with the grade, thickness and monthly volume. If the grade is not settled, say so and we will advise against the application.