Skip to content

Products

E&I laminations for transformer cores

Alpine Electrotech makes E and I laminations for transformer cores in CRGO and CRNO at its works in Daman, India. The standard types are already tooled and listed with every dimension on the E&I chart; sizes outside it are made to your drawing.

Specification

Grades
CRGO, CRNOCRGO: Grain-oriented electrical steel for transformer cores. CRNO: Non-oriented electrical steel for rotating machines.
Thicknesses
0.23 mm to 0.50 mm
Coatings
C3, C3L, C4, C5, C5L, C6, C6L
Sold by
By weight (kg)

The thicknesses and coatings available for a given part depend on the grade. We confirm availability for your part at enquiry.

How it is made

Coil is slit in house to the width the tool needs, from mother coil up to 1250 mm wide, and the slit edge is checked for burr before the strip is released to the press floor.

Alpine Electrotech stamps on progressive tooling on power presses from 10 T to 220 T. Tools are built from tungsten carbide or high-speed steel to suit the part, and are maintained on the same floor that runs them.

The whole run, from material selection to packing, is set out under how a coil becomes a packed lot.

Which markets take it

Inspection and documents

What we check, and when

Common questions

Do you make standard E&I laminations, or only to drawing?
Both. The standard E and I transformer lamination types Alpine Electrotech tools for are listed with their dimensions on the E&I chart, and can be downloaded as a PDF or a spreadsheet. Everything outside that list is made to your drawing.
Which coatings can you supply?
Alpine Electrotech supplies C3, C3L, C4, C5, C5L, C6 and C6L coatings. The coatings available for a given part depend on the grade and the source mill, and we confirm them at enquiry.
What tolerances do you hold?
Alpine Electrotech agrees tolerances per part against your drawing and confirms them at first-off inspection. We do not publish a blanket tolerance, because the figure that matters is the one on your drawing.
What documents come with a despatch?
Every despatch from Alpine Electrotech carries the source mill’s test certificate and a finished-goods inspection report, raised per lot. Lot identity is maintained through packing.

Other products

Every product in one list

Request a quotation

What do you need? *
See the E&I chart

Up to 10 MB. .pdf, .dwg, .dxf, .step, .stp, .igs, .iges, .png, .jpg, .jpeg, .zip.

We reply within two working days.

We use what you send only as set out in our Privacy policy